Flat Roof Membrane System and Pitched Roof Coating
Energy Efficient, Lifetime, Flat Roof Systems
US Coating Solutions' high buildup flat roof system
is designed to last a lifetime, save energy with ultimate UV protection
and reflectance and require very little maintenance. US Coating
Solutions' elastomeric roof membrane is a water barrier that also
provides anti-microbial protection from mold, mildew, algae and
bacteria.
US Coating Solutions will design the most cost
effective solution for your roof
Basic Membrane System
After cleaning the roof, (Anti-Mold Soap is recommended
to remediate any mold problems) coat with CLP Roof-Lok at the rate
of 100 sq. ft a gal. Let that cure for 24 hours. Apply CLP Flex-Roof
Coating at the same rate and you have a great roof. It is required
that you clean and re-coat the roof every 10 years with a coat of
CLP Flex-Roof. There is no need to reapply the Roof-Lok unless there
has been some physical damage. This will extend our 10 year warranty
for an additional 10 years.
High Buildup Membrane System
Basic application: Apply CLP Roof-Lok at the rate
of 100 to 150 sq. ft gal, rolling Poly-Steel Fiber into the coating.
Then apply a second coat of CLP Roof-Lok over the fiber at that
same rate and let cure for 24 hours. Apply Recycled Liquid Rubber
at the rate of 50 sq. ft per gal. Let cure for 48 hours. The final
coat is CLP Flex-Roof applied at the rate of 100 sq. ft per gal.
This flat roof system comes with a lifetime conditional warranty
if it is cleaned and re-coated with CLP Flex-Roof Coating every
10 to 12 years at the rate of 100 sq. ft/gallon. This is a 30+ mil
membrane that cannot be matched by any similar coatings. CLP Flex-Roof
comes in white and can be tinted any pastel based color.
CLP Roof Lok: CLP Roof Lok is used as the prime
coat and stain block over dry cured asphalt surfaces before applying
white reflective elastomeric coatings.
Recycled Liquid Rubber is a liquid emulsion
formulated with the use of ground rubber from recycled tires. The
cured recycled liquid rubber produces a monolithic elastomeric membrane.
This high solids product adheres and conforms to irregular surfaces
of cant strips, parapet walls, roof vents, skylights, and other
problem areas without using metal clamps and edging. Recycled Liquid
Rubber is very economical, durable and user friendly. It cures dry
and does not soften with the heat of the sun, nor will it become
brittle.
Poly Steel Fiber: Poly-Steel Fiber is a woven
polyester fabric with a non-woven polyester fabric bonded to the
surface. Poly-Steel Fiber is a polyester scrim with a thin layer
of spun-bonded polyester bonded to the top side. This is a special
purpose roofing fabric with tensile strength in both directions,
plus elongation.
CLP Flex-Roof: CLP Flex-Roof is a liquid acrylic
emulsion formulated to cure to a flexible waterproof membrane. The
cured product has excellent tensile, elongation, flexibility and
recovery properties. It contains ultimate UV protection and a anti-microbial
package to prevent mold/mildew/bacteria. CLP Flex-Roof is a proven
quality product for roofing and waterproofing that has been time
tested since 1975. CLP Flex-Roof can be tinted any white based color
and is shipped in white to provide the highest level of UV protection.
US Coating Solutions personally evaluates each project
to provide the most cost effective application. Please call Garry
at 386-313-3033 or Contact
us by E-mail
Pitched Roof Coating and Restoration
Roof Lok and CLP Flex-Roof
CLP Roof Lok: CLP Roof Lok is
used as the prime coat and stain block over dry cured asphalt and
cement surfaces before applying white reflective elastomeric coatings.
CLP Roof Lok is applied at the rate of 100 to 150 sq. ft/gallon
by roller or airless spray gun.
CLP Flex-Roof: CLP Flex-Roof is
a liquid acrylic emulsion formulated to cure to a flexible waterproof
membrane. The cured product has excellent tensile, elongation, flexibility
and recovery properties. It contains ultimate UV protection and
a anti-microbial package to prevent mold/mildew/bacteria. CLP Flex-Roof
is a proven quality product for roofing and waterproofing that has
been time tested since 1975. CLP Flex-Roof can be tinted any white
based color and is shipped in white to provide the highest level
of UV protection. CLP Flex-Roof is applied at the rate of 200 sq.
ft/gallon by roller or airless spray gun.
This is a very cost effective solution
to keep your roof looking great for many years without mold/mildew
because of our anti-microbial package and proven UV protection (also
acid rain protection).
CLP
Flex-Roof with CLP Roof Lok Makes a 1920's Home Look New
US Coating Solutions personally evaluates each
project to insure a successful application. Please call Garry at
386-313-3033 or Contact
us by E-mail
|
